V8.2	Modbus TCP:
		when the qty of bytes received bytes qty is different than the MBAP header, request is rejected and error mentionned
		when CRC16 calculation is wrong, error is now mentionned and frame is rejected

V8.1	Modbus & Terminal:
		Server connexion are not closed anymore in case of inactivity 


V8.0	general: 
		Backgroud Colour of some fields were based on Windows palette which could differ. Changed to fixed colour
		fixe Toolbar (at bottom) truncated depending of screen definition.
	- FINS  
		fixe a bug on 'change mode button' (RUN mode)
	- terminal
		TCP auto reconnexion enhanced when server
		

V7.9	-Terminal
		Modem GSM PIN code command button improved

V7.8	-Terminal TCP
		Bug fixed: reception was missing control characters
	- Modbus TCP
		Bug fixed: Local port fixed generate error when re-connecting to a Modbus TCP server

V7.7	-Terminal
		Allow to send text file
		small bug fixed on bottom function button which was not sent when Ethernet was selected

V7.6	- Client OPC
		Small change

V7.5.5	- Modbus TCP & Terminal
		Using Ethernet, Local Port number could be selected
V7.5.4	- Sysmac-way
		Bug fixed on Program Upload function (troncated program in particular case)
	- OPC client
		Wrong Delay displayed (x1000)	
		adding/removing items enhanvement

V7.5.1	- minor bug fixed
		Some Laptop without serial port could generate an error when Multiway list them in the listbox at initialisation

V7.5	- SysmacWay
		Bug fixed on program upload interrupted by wrong sequence END
		Editor Buffer cleaned and speed up


V7.4	- Terminal
		Bug fixed on memorized frames sent using control character (in the combo-box history)
	- FINS
		Update of unit type

V7.3	- SYSMACWAY
		Terminator optional by check box 

V7.2.8	- FINS
		Update of unit type
	- fixe bug when changing the regional settings (decimal caracter)

V7.2.7	-Modbus
		fixe slave number format  (2 digits hexa)

V7.2.6	- Fixe an installation problem on English version

V7.2.5	- minor bug fixed on Modbus Server reception

V7.2.4	- Ethernet communications
		Teminal UDP/TCP improvment on Ascii/binary mode display.
		Remote and Local port retained for FINS, Modbus, terminal and Booster

V7.2.3	- All communications
		waiting answer does not keep process ressource anymore 
	- Modbus TCP
		Fixe problem of adaptor selection when TCP client selected.
		Server does not disconnect anymore after 120s without communication. It goes back to Listen status
	- FINS
		Unit profile update

V7.2	- Modbus
		Any slave number could be simulate by using slave number 00
		bug fixed on timer still running when slave
	- Help menu to www help page

V7.1.4	- Sniffer
		Terminator selected was not displayed
	- All tabs
		The response time was related to the size of the editor (refresh speed)
		refresh method improved.

V7.1.3	- Modbus
		bug fixed on client response

V7.1.2	- Terminal
		minor bug at startup condition with Row or character mode

V7.1.1	- Terminal
		GSM Modem config download enhanced
		bug fixed when choosing request in the previous list of the combo box

V7.0.0	- Design changed
	- Modbus TCP
		bug fixed on the length calculated in the response header
	- CP1H/L Error code added

V6.8.3	- FINS
		add new unit profile
	- Terminal
		fixe bug on display Modem frame
	- sniffer
		fixe bug on display timestamp twice

V6.8.2	- Terminal
		UDP/TCP connection
	- Modbus
		Frames are now splitted by bytes
	- Sysway
		DM upload was stopped by a debug line forgotten

V6.8.0	- Terminal
		Modem fonctionnalities implemented (PSTN & GSM)
	- Modbus TCP
		Timer enabled
	- General
		Buttons hightlighted when pressed


V6.7.4	- Modbus: fixe Bux when editor filled
		fixe bug on Button SEND when not connected

V6.7.3	- Terminal: line command enhanced


V6.7	- FINS UDP: default Local port 9001 to avoid conflict with Cx-server
		    bug fixed on wrong local port opened
		    DA1 automatically calculated when ping OK
		    When Fins Request received  (ICF <82) there is no error code field to control (ex: SEND from an PLC)
	- new unit profile updated (for read unit model command)

V6.6	- Ethernet adapter selection allowed
	- local help on text (hyperlink style)
	- local & remote IP revised
	- Modbus Slave correction on  function code 01 02 06
	- design

V6.5
	- Toolbus:  fixe connection problem when serial interface used (ex: bluetooth) 
	- Modbus:  Option fill blank with 0
                  	 Fixe bug on Modbus function code 0F (size +1 was written)
                  	 TCP Server disconnection after 120s without communications (keep alive)
                  	 TCP server switch to listen state after client disconnection.

V6.4 (minor)
	- Master/slave & Client/Server splited
	- Local & Remote Port managment revised

V6.3
	- Real Modbus slave RTU & TCP (instead of automated response)
	- TimeStamp information improved

V6.2.1 (minor)
	- small bug displayed when connecting with V700

V6.2
	- Bug introduced by V6.00 in the Compoway protocole. Response was wrongly interpreted (ascii convertion)

V6.1
	- Log all exchange in to file saved in ...\Multiway\logfile.txt
	- Timer display problem fixed

V6.0
	- V700 and Compoway split into the same tab
	- direct Ping command in FINS & Modbus TCP tab (golf)
	- check if 2 Ethernet cards used by the computer then warning message when TCP/UDP message sent

V5.4
	- Sniffer improvement (in setup)
	- Modbus combo box bug fixed
	- Editor size increased
	- serial port list refreshable (USB)
	- wiring revised

V5.2
	- New Tab 'OPC Client' with array tag  and reporting
	- Booster UDP
	- FINS commande added 
		create  I/O Table
		Read error log
		Read Unit Model, Lot n°, Unit version
		DM Upload/Download

V4.3
	- RTS CTS led activity (RTS can be forced)
	- Compoway/F toolbar command

V4.2
	- fixe socket close ( when FINS TCP used)
	- fixe ComPort problem on sniffer when port disappear (USB convertor)
	- Ascii display was forgoten in HostLink FINS editor

V4.1
	- Bug: one debug line was left in Terminal mode
	- ASCII editor enhanced (upload/download)

V4.0
	- Program Upload/Download to/from TXT file( Sysway only)
	- DM Upload/download from/to CSV file (Sysway and FINS)
	- Modbus slave according to the slave No specified
	- FINS error code enhanced
	- serial port Number limited to existing port

V3.1
	- FINS command detailled with example
	- RTS control
	- ASC02, BCC review...

V3.0
	- Toolbus protocol (auto-detect procedure)
	- Ethernet TCP
	- Only English until now
	- all tabs look similar
	- list of Fins and sysway error code
	- omron cable drawing
	-Terminal improvements
	
V2.6
	- autodetect Sysmac-way, FINS Modbus and modem
	- sniffer improved
	- com fomat stored

V2.5
	- 2 more tabs:
		sniffer allow to watch exchange between 2 RS232C devices (for instance PLC and modem)
		booster allow to load a communication with a slave (omron, modbus  or what ever) using RS232C. Only communication error are displayed. This can be used to detect noise on the line.
	- BCC of V700/V720 revised
	- Modbus slave or master emulation
	- all Tabs setup parameter saved